신고사유
신고해주신 내용은 쇼핑몰 운영자의 검토 후 내부 운영 정책에 의해 처리가 진행됩니다.
상품명 | [Sapim] 샤핌 수퍼스포크 J-band and 니쁠 (블랙) |
---|---|
제조사 | Sapim |
판매가 | 5,500원 |
적립금 | 140원 (2.5%) 20원 (0.3%) 30원 (0.5%) |
배송방법 | 택배 |
배송비 | 3,000원 (100,000원 이상 구매 시 무료) |
수량 |
월 렌탈 금액 |
월 원 (개월 기준)
|
---|
구매방법 | |
---|---|
배송주기 |
정기배송 할인 save
|
길이 | |
---|---|
옵션선택 |
(최소주문수량 1개 이상 / 최대주문수량 0개 이하)
사이즈 가이드할인가가 적용된 최종 결제예정금액은 주문 시 확인할 수 있습니다.
샤핌 수퍼스포크 1개와 알루미늄 니쁠 15G (1.8x12mm) 1개 구성입니다.
1 pcs of Sapim Super Spoke and 1 pcs of Polyax 15G aluminum nipple (1.8x12mm)
The lightest stainless steel spoke ever made. The Super Spoke has been developed for extra light wheels. A new grade of stainless steel enables Sapim to reduce the diameter of the spoke, whilst increasing its strength and fatigue resistance.
Technical specs
- Weight: 2.2~2.3g / pcs
- Quality: Special stainless steel
- Strength on middle section: 2900 N/mm2
Dimensions
- Length: 143, 150, 151, 152, 153, 158mm
- Diameter: 1.8 - 1.4 - 1.8 mm
Installation instruction for Super Spoke
The Super Spoke is a tuning-part of your bike. Please read carefully the following recommendations when using it.
Because the elasticity of the Super Spoke is high, please use a length that is 1 mm shorter than that provided by the spoke calculator or suggested by your experience.
The recommended spoke-tension to build a stiff wheel-set with the Super Spoke is:
As you probably already know, a high tension is always better. The higher the tension the stiffer the wheel. Please make sure that you respect also the requirements provided by your rim-manufacturer and do not forget that the tension of each wheel-side should be equal.
Use only aluminum nipples from Sapim. They will reduce the friction on the thread thanks to the Sapim’s special coating that reduces the torsion on the spoke.
Before assemble the spokes please check if the hub-flange and the spoke-holes are suited for the spoke flexure. Little spoke-holes up to 2.3mm are preferred. Please avoid inflexions between nipples and spokes.
글읽기 권한이 없습니다.
"19세 미만의 미성년자"는 출입을 금합니다!
번호 | 카테고리 | 제목 | 작성자 | 작성일 | 조회 |
---|---|---|---|---|---|
2 | 148mm로 커팅도 혹시 가능한가요? | 김**** | 2021-10-05 00:06:42 | 47 | |
1 | 148mm로 커팅도 혹시 가능한가요? | 김동조 | 2021-10-05 10:29:03 | 55 |